Latest tread mill sale Tenders | Government tread mill sale Tenders

Central Government And Public Sector

CTN :43727591

27 May, 2026 NA

West Champaran - Bihar

Tender For bid to ras supply of twister - outdoor gym equipment (q3) , sit up board outdoor gym equipment (q3) , air walker / stroller outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , chest press - outdoor gym equipments (q3) , surf board - outdoor gym equipment (q3) , leg press - outdoor gym equipments (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3)

corporations/Associations/Others

CTN :44433625

27 May, 2026 NA

Kapad Wanj - Gujarat

Tender For bid to ras supply of air walker / stroller - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3) , surf board - outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , twister - outdoor gym equipment (q3) , chest press - outdoor gym equipments (q3) , leg press - outdoor gym equipments (q3)

CTN :45306403

30 May, 2026 30.78 Lacs

Faridabad - Haryana

Tender For beautification and development of undeveloped park through plantation of grass, shrubs, open gym, children play equipment etc. in gali no.54 sanjay colony, ward no. 5, faridabad. - transportation all items, installation charge all items, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm nb b class gi-pipe. the handle frame is made of 25mm nb b class gi-pipe. foot rod is made from 50x50 ms square pipe of 3mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f air walker is made from is-1239 b class gi-pipe. the bend pipe is of 80mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 25mm nb c class gi-pipe. the leg frame is made of 32mm nb b class gi-pipe. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick,, p/f horse rider is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and connecting rods is made of 25mm nb c class gipipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick., p/f leg press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. seat frame is made from 32mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from b class gi-pipe, ms round plate of 250mm dia and 10mm thick, p/f push-up-bar is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the foundation used for fixing it consist of three equal items i.e. 80mm nb made from

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

CTN :45171586

02 Jun, 2026 2.98 Lacs

Bhopal - Madhya Pradesh

Tender For engagement of agency for supply, installation and maintenance of open gym equipment at bhopal. - body shaper (twister) leg & thigh exercise air swing leg press cycle uc-19 gym

CTN :45308020

03 Jun, 2026 26.00 Lacs

Basti - Uttar Pradesh

Tender For supply of air walker / stroller - outdoor gym equipment (q3) , chest press - outdoor gym equipments (q3) , leg press - outdoor gym equipments (q3) , surf board - outdoor gym equipment (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , functional trainer (q4) , twister - outdoor gym equipment (q3) , multi adjustable bench (v2) (q3)

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

State Government

CTN :45268829

09 Jun, 2026 NA

Satna - Madhya Pradesh

Tender For 2026_mpfd_2026_27_03 open gym equipment - straight frp slide web slides spiral slide two-seater hammock four-seater circular/merry-go-round type swing four-seater see-saw multi-play system (including hexagonal deck) item b air walker single single abdominal bench body balance chest press leg press double cross trainer single shoulder press surf board pendulum cycle double

CTN :45298070

01 Jun, 2026 5.00 Lacs

Valod - Gujarat

Tender For supply of air walker / stroller - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , twister - outdoor gym equipment (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , leg press - outdoor gym equipments (q3) , chest press - outdoor gym equipments (q3) , surf board - outdoor gym equipment (q3)

CTN :45116217

27 May, 2026 NA

Chapara - Bihar

Tender For corrigendum : supply of twister - outdoor gym equipment (q3) , chest press - outdoor gym equipments (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , air walker / stroller - outdoor gym equipment (q3) , leg press - outdoor gym equipments (q3) , surf board - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3)

Tread Mill Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government